Software - Products - Chromservis.cz
Section: Homepage » Laboratory » Chromatography » Instruments » GC » Software
Please select a product branch from the tree below.
A [^]
A/D Converter U-PAD2, External USB, 2 channels [U22]
U-PAD2 is an external 24-bit A/D converter that measures the voltages of chromatographic and electrochemical detectors. Integration frequency up to 400 Hz enables Fast GC application. U-PAD2 uses the USB communication channel and thus is directly powered from the PC. The unit can be connected or disconnected anytime without the necessity to switch the computer off. The input connector is compatible...
A/D Convertor INT7, Internal PCI, 1 channel [I71]
INT7 is an internal 24-bit A/D converter board that measures the voltages of chromatographic and electrochemical detectors. It contains 1 data-acquisition channel on one board (two and four channel versions are also available). The channels are completely independent, sigma delta integrating A/D converters, used for processing positive and negative voltages. The board includes four digital...
AS Control Module [A26]
AS Control is a software module that provides an interface with chromatography device – autosampler. Direct control means that the device can be controlled from the Clarity environment. Clarity can store various device methods for each type of analysis and then automatically apply them in a sequence. The control options specific for the controlled device are stored in the measured chromatograms....
C [^]
Chromatography station Clarity 32bit for 1 instrument [C50]
Clarity is advanced Chromatography Data Station (CDS) with optional software modules for data acquisition, data processing, and instrument control. Its wide range of data acquisition interfaces (A/D converters, LAN, USB, RS232) allows connection to virtually any chromatograph. Up to four independent chromatography systems, each of which can be equipped with up to 12 detectors (signals), can...
Clarity Lite Chromatography Station [C40]
The Clarity Lite chromatography station is designed to acquire and evaluate data from any commercially available chromatograph with standard analog output. One chromatography system equipped with up to four detectors (sharing one common timeline) can be connected. Clarity Lite is a low-budget version of Clarity designed to control a single chromatography system only. Its use is also limited...
G [^]
GC Control Module [A23]
GC Control is a software module that provides an interface with chromatography device – GC Chromatograph. Direct control means that the device can be controlled from the Clarity environment. Clarity can store various device methods for each type of analysis and then automatically apply them in a sequence. The control options specific for the controlled device are stored in the measured chromatograms....
M [^]
MultiCOM 1xUSB to 6x RS232 Convertor [MC01]
MultiCOM extends the PC by 6 Com ports (RS232). This enables to connect multiple instruments controlled using the RS232 line. Many of the controlled instruments are connected to the PC via serial cables, which need standard 9-pin (male) connector on the computer side. Modern computers usually do not have more than 1 COM port, and notebooks commonly have none. The MultiCOM RS232 to USB converter...
eVol® XR Digitally Controlled Syringe